Functional Description; Important Safety Instructions For Battery Chargers - Black & Decker LHT321 Instruction Manual

To reduce your exposure to these
chemicals, wear approved safety equipment
such as dust masks that are specially
designed to filter out microscopic particles.
SyMBolS
The label on your tool may include the
following symbols. The symbols and their
definitions are as follows:
V .....................volts
A ....................amperes
Hz ...................hertz
W....................watts
min .................minutes
or AC .........alternating current

funcTIonal deScrIPTIon

1. Trigger Switch
2. Lock-off Button
3. Switch Handle
4. POwERCUT TM
5. Blade Guard
6. Bail Handle
7. Blade
8. Battery
9. Charger
20v MaX* watt
Batteries Hours
lBX20
lBXr20
lBXr2020
lBXr2520
lB2X3020
lB2X4020
**All charge times are approximate. Actual charge time may vary.
IMPorTanT SafeTy
InSTrucTIonS for
BaTTery cHarGerS
Save THeSe InSTrucTIonS: This manual
contains important safety instructions for
battery chargers.
• Before using charger, read all instructions
and cautionary markings on charger, battery
pack, and product using battery pack.
warnInG:
allow any liquid to get inside charger.
cauTIon:
Burn hazard. To reduce
the risk of injury, charge only designated
BLACk+DECkER batteries. Other types of
batteries may burst causing personal injury
Button
Black+decker Battery and charger Systems
Chargers/Charge Time** (Hours) (0% to 100% charge)
lcS200
26
6.5
30
7.5
40
10
50 12.5
60
15
80
20
Shock hazard. Do not
or DC ......direct current
n o ...................no load speed
..................Class I Construction (grounded)
...................earthing terminal
.................safety alert symbol
..................Class II Construction
.../min or rpm...revolutions or reciprocation
...................Use proper respiratory protection
..................Use proper eye protection
...................Use proper hearing protection
8
9
7
20v MaX* chargers
lcS1620 lcS201
3.25 1.3
3.75 1.5
5 2
6.25 2.5
7.5 3
10 4
and damage.
cauTIon:
the charger plugged in to the power supply,
the charger can be shorted by foreign material.
Foreign materials of a conductive nature such
as, but not limited to, steel wool, aluminum foil,
or any buildup of metallic particles should be
kept away from charger cavities. Always
unplug the charger from the power supply
when there is no battery pack in the cavity.
Unplug charger before attempting to clean.
warnInG:
charge the battery pack with any
chargers other than the ones in this
manual. The charger and battery pack are
specifically designed to work together.
4
(double insulated)
per minute
...............Read instruction manual before use
4
6
5
lcS202 l2afc
0.65 0.65
0.75 0.75
1
1.25 1.25
1.5 1.5
2
Under certain conditions, with
do noT attempt to
3
2
1
l2afcBST
0.65
0.75
1 1
1.25
1.5
2 2