Gigaset SL930A Manual page 13

u
Country, area and local code
If your handset is already registered to a base station, you can now configure your country
settings along with the country and area codes. The country selection is the basis for the
automatic setting of the time zone and country code. Your telephone needs a country and
area code to correctly dial numbers, which may be saved in different formats on your
handset, and to load country-specific applications.
¤
Tap on End to close the wizard and save the settings.
Your phone is now ready for use.
u
The installation wizard is started when the handset is switched on for the first
time. It is also started after you reset the handset to factory settings. If the
installation has not been completed, the wizard starts every time you switch the
handset on.
u
In the
also configure other settings.
u
If you have purchased your handset together with the Gigaset SL930A base, it is
already registered. If not, you must register your handset to the base.
Then select the settings for your country, and local area codes using the
Phone app:
¤
Country or
u
If you have not set up a Google account, no WLAN connection will be established.
In this case, set up a WLAN connection now.
User guide
Online: You can find further information on your telephone online using the handset. As soon
as your phone is connected to the WLAN and is able to establish an Internet connection, you can
use the online help on the handset.
¤
Open the start screen and tap on
To enable you to quickly find the desired information, a table of contents
and a search function
The online help provides comprehensive information about navigation options on the first
page.
To print it out: You can find the comprehensive user guide as a PDF file at
www.gigaset.com/gigasetSL930A.
Settings menu, you can change the settings that have been made and
Start screen
Area (dial code)
are available. Scroll through the help site with
Basic settings with the installation wizard
Context menu Settings
Help.
, an index
.
11