1. Manuals
  2. Brands
  3. Brother Manuals
  4. All in One Printer
  5. DCP-J4110DW
  6. Quick setup manual

Brother DCP-J4110DW Quick Setup Manual

Hide thumbs Also See for DCP-J4110DW:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Advanced User's Manual
Quick Setup Guide
Start Here
Please read the Product Safety Guide first before you set up your machine. Then, please read this Quick Setup
Guide for the correct setup and installation.
WARNING
CAUTION
IMPORTANT
NOTE
1

Unpack the machine

WARNING
Plastic bags are used in the packing of your machine. To avoid the danger of suffocation, keep these
plastic bags away from babies and children. Plastic bags are not toys.
a
Remove the protective tape and film covering the machine, and also from the Touchscreen.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injuries.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injuries.
IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in
damage to property or loss of product functionality.
Notes tell you how you should respond to a situation that may arise or give tips about how the
operation works with other features.
DCP-J4110DW
CEE-ENG Version 0
1

Advertisement

Table of Contents
loading

Related Manuals for Brother DCP-J4110DW

Summary of Contents for Brother DCP-J4110DW

  • Page 1: Unpack The Machine

    Quick Setup Guide Start Here DCP-J4110DW Please read the Product Safety Guide first before you set up your machine. Then, please read this Quick Setup Guide for the correct setup and installation. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death WARNING or serious injuries.
  • Page 2 Gently put the paper into the paper tray print Load plain A4 paper side down and top edge first. IMPORTANT Be careful that you do not push the paper in too CAUTION far; it may lift at the back of the tray and cause paper feed problems.

  • Page 3: Connect The Power Cord

    While holding the paper tray in place, pull out Connect the power cord the paper support until it clicks, and then unfold the paper support flap. NOTE WARNING For printing and copying on special media, open the manual feed slot a on the back of the The machine must be fitted with an earthed machine.

  • Page 4: Install The Ink Cartridges

    Remove the orange protective part. Install the ink cartridges Unpack the ink cartridge. Turn the green release lever on the orange protective packing a counterclockwise until it clicks to release the vacuum seal. Then CAUTION remove the orange protective packing a as shown.

  • Page 5: Check The Print Quality

    Take care to match the sticker colour with the Choose your language cartridge colour. Install each ink cartridge in the direction of the (if needed) arrow on the label. Gently push the back of the ink cartridge Press Settings. marked “PUSH” until the cartridge lever lifts. After all the ink cartridges are installed close Press s or t to display Initial Setup.

  • Page 6: Set The Time Zone

    Set the Time Zone You can set the time zone on the machine for your location. Press Settings. Press s or t to display Initial Setup. Press Initial Setup. Press Date & Time. Press Time Zone. Enter your time zone. Press OK.

  • Page 7: Choose Your Connection Type

    • If your computer does not have a CD-ROM drive you can download the latest drivers, manuals and utilities for your model from the Brother Solutions Center at http://solutions.brother.com/. Some software applications included on the CD-ROM may not be available as a download.

  • Page 8: For Usb Interface Users

    ® Windows For USB interface users ® ® ® (Windows XP Home/XP Professional/Windows Vista /Windows Before you install Connect the USB cable Make sure that your computer is ON and you are logged on with Administrator rights. Install MFL-Pro Suite Put the supplied installation CD-ROM into your CD-ROM drive.
  • Page 9 The following screens will appear. • When the Software Update Setting screen appears, choose the software update setting you want and click OK. • When the Brother Product Research and Support Program screen appears, select IMPORTANT your preference and follow the on-screen instructions.
  • Page 10 Macintosh For USB interface users (Mac OS X v10.5.8, 10.6.x, 10.7.x) Before you install Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. Connect the USB cable IMPORTANT IMPORTANT Make sure that the cable does not restrict the...
  • Page 11 Next. Follow the on-screen instructions. Please wait for the software to install. After the installation, the Brother software will search for the Brother device. This will take a few moments to complete. Choose your machine from the list, and then click OK.

  • Page 12: Connect The Network Cable

    Wired Network ® Windows For wired network interface users ® ® ® (Windows XP Home/XP Professional/Windows Vista /Windows Before you install Make sure that your computer is ON and you are logged on with Administrator rights. Connect the network cable IMPORTANT Make sure that the cable does not restrict the cover from closing, or an error may occur.
  • Page 13 Follow the appears, choose the software update setting on-screen instructions. you want and click OK. • When the Brother Product Research and Choose Wired Network Connection Support Program screen appears, select (Ethernet), and then click Next.
  • Page 14 Wired Network Macintosh For wired network interface users (Mac OS X v10.5.8, 10.6.x, 10.7.x) Before you install Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. Connect the network cable...
  • Page 15 Please wait for the software to install. After the installation, the Brother software will search for the Brother device. This will take a few moments to complete. If the machine is configured for your network, choose your machine from the list, and then click OK.

  • Page 16: For Wireless Network Users

    For Wireless Network Users For wireless network interface users Before you begin Although your Brother machine can be used in both a wired and wireless network, only one of the connection methods can be used at a time. NOTE If you have previously configured the wireless settings of the machine you must reset the network settings before you can configure the wireless settings again.
  • Page 17 For Wireless Network Users SSID (Network Name) / Network Key Please do not contact Brother Customer Service for assistance without the wireless security information. We cannot assist you in locating your network security settings. Item Record the current wireless network settings...
  • Page 18 For Wireless Network Users Setup using the Temporarily connect the USB cable (not included) directly to the computer and the installation CD-ROM and machine. ® a USB cable (Windows If the confirmation screen appears, check the box and click Next, go to g. and Macintosh) Otherwise, go to h.
  • Page 19 For Wireless Network Users Enter the Network Key you wrote down on page 16, and then click Next. NOTE If your network is not configured for Authentication and Encryption, the following screen will appear. To continue configuration, click OK and go to j. Click Next.

  • Page 20: For Windows Users

    Press Yes to connect your machine using please go to the manuals download selection on WPS. (If you choose No to continue manual your model’s home page of the Brother Solutions configuration, go to d to enter a Network Key.) Center at http://solutions.brother.com/.

  • Page 21: Wireless Network

    Put the supplied installation CD-ROM into your sensitive. CD-ROM drive. Follow the on-screen instructions. The installation of the Brother drivers will automatically start. The installation screens The CD-ROM Top menu will appear. appear one after another. Click Install MFL-Pro Suite and click Yes if you accept the license agreements.
  • Page 22 The following screens will appear. • When the Software Update Setting screen appears, choose the software update setting you want and click OK. • When the Brother Product Research and Support Program screen appears, select your preference and follow the on-screen instructions.
  • Page 23 If your wireless settings fail, the Wireless Device Setup Wizard screen appears. Follow the on-screen instructions to complete the wireless configuration. Choose your machine from the list, and then click OK. The installation of the Brother drivers will automatically start. Please wait for the software to install.

  • Page 24: Install Optional Applications

    Install Optional Applications ® Windows Install optional Install FaceFilter Studio applications Help You can install the following applications. To run FaceFilter Studio, go to FaceFilter Studio and BookScan & Start/All Programs/Reallusion/ Whiteboard Suite supported by FaceFilter Studio on your computer. Reallusion, Inc Click Check for Updates on the screen.

  • Page 25: For Network Users

    For Network Users Reset the network settings to factory default To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below. Make sure the machine is idle, then disconnect all the cables from the machine (except the power cord). Press Settings.
  • Page 26 The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

Table of Contents