ZyXEL Communications PLA4101 User Manual page 8

Table 3 LEDs: 200 Mbps Models (continued)
LIGHTS ICON COLOR
HomePlug Green
Amber
Red
Green/
Amber/
Red
ETHERNET Green
Table 4 LEDs: 500 / 600 / 1000 / 1200 / 1800 Mbps Models
LIGHTS ICON COLOR
POWER Green
HomePlug Green
Amber
Red
Green/
Amber/
Red
ETHERNET Green
Chapter 1 Introducing the PLA
STATUS DESCRIPTION
On The PLA detects another powerline adapter. The data transfer
rate is greater than 40 Mbps.
The PLA detects another powerline adapter. The data transfer
rate is between 12~40 Mbps.
The PLA detects another powerline adapter. The data transfer
rate is between 0~12 Mbps.
Blinking The PLA is communicating with another powerline adapter.
Data is being transmitted and/or received.
Off The HomePlug port does not detect another powerline
adapter.
On The ETHERNET port is on and ready and the PLA detects a
device connected to it.
Blinking The PLA is communicating with a networking device
connected to it.
Off The PLA does not detect any devices connected to its
ETHERNET port.
STATUS DESCRIPTION
On The PLA is on and receiving power.
It also indicates a successful connection using the RESET/
ENCRYPT button.
Blinking It indicates the PLA is trying to connect with another device
using the ENCRYPT function.
The Power LED blinks when it is in standby mode. Refer to
Section 1.3 on page 9
Off The PLA is not receiving power.
On The PLA detects another powerline adapter. The data transfer
rate is greater than 80 Mbps.
The PLA detects another powerline adapter. The data transfer
rate is between 20~80 Mbps.
The PLA detects another powerline adapter. The data transfer
rate is between 0~20 Mbps.
Blinking The PLA is communicating with another powerline adapter.
Data is being transmitted and/or received.
Off The HomePlug port does not detect another powerline
adapter.
On The ETHERNET port is on and ready and the PLA detects a
device connected to it.
Blinking The PLA is communicating with a networking device
connected to it.
Off The PLA does not detect any devices connected to its
ETHERNET port.
PLA Series User's Guide
8
for details on this feature.