Macintosh (Mac); Supported Oss; Installing The Utility - ZyXEL Communications PLA4101 User Manual

Figure 9 Installation Complete
Note: You may be asked to restart your computer when the installation is complete. Click
"Yes" to restart your computer. If you select "No, I will restart my computer later",
you will not be able to launch the utility until after a restart of your computer.

3.2 Macintosh (Mac)

This section uses the Mac OS X 10.8 screens as an example to show you how to install the Mac
vesion of the ZyXEL PLA Series Configuration utility.

3.2.1 Supported OSs

At the time of writing, the following Mac operating systems support the ZyXEL PLA Series
Configuration utility:
• Mac OS X 10.6
• Mac OS X 10.7
• Mac OS X 10.8

3.2.2 Installing the Utility

Follow the steps below to install the ZyXEL PLA Series Configuration utility on your Mac
computer.
Go to the ZyXEL Download Library and download the utility to your computer..
1
Double-click the PLA Utility 1.0.0.mpkg file to run the installation program. When it opens, follow
2
the on-screen instructions.
Chapter 3 Installing the Utility
PLA Series User's Guide
25