Table of Contents
Advertisement
MENU OPERATIONS
C. Symbol Rate
Set the symbol rate. It is available while Search Mode is Auto or Manual,.
D. Qam Mode
Select the Modulation. It is available while Search Mode is Auto or Manual,.
E. Start Frequency
Set the start frequency from which the services will be searched. It is available while
Search Mode is Auto,.
F. End Frequency
Set the end frequency from which the services will be searched. It is available while
Search Mode is Auto,.
G. Network Search
When Search Mode is the Manual, you can select On or Off.
Network Search is to identify all information on several frequencies through information
on one frequency and then to search the services of all frequencies identified. You can
search many services with information on just one frequency.
H. FTA/Scrambled
Select the type of service you want to search. There are 2 types of service : FTA(Free
To Air) and scrambled.(CAS : pay services). Press the
,
button to select FTA only,
CAS only or FTA+CAS.
I. Start Search...
To start the searching process, press
button at this item.
To stop the searching process on the way, press either the
button or the
button. This menu will be shown as long as the STB is searching for channels. All
channels found will be listed in two columns on the screen with TV channels in one
column and Radio channels in the other. Please note that the search procedure may
take a few minutes.
When the search procedure is completed, the screen will show how many TV and Radio
channels have been found. Press
button to save the channels.
Transponder
21
Advertisement
Table of Contents
