Table of Contents
Advertisement
Motor Control I/O Board User's Manual
10. GUI Operation
To operate the motor from the PC GUI, the code has to be rebuilt with "GUI" option. Select
Compiler Options from PM+ Tool menu and type "GUI" in Preprocessor
Rebuild and download the code to the microcontroller flash. At this point the motor can be
controlled from the GUI only.
Connect the PC serial port to the starter kit J9 DB-9 RS232 connector with the serial cable supplied
and launch the communication program Motor Panel, click Start
Motor Panel GUI
1. Select the appropriate COM port your PC and click OK.
12
Figure 15. Compiler Options for PC GUI Operation
Figure 16. PC COM Port Selection
Define Macro entry.
Programs
NEC Tools32
Advertisement
Table of Contents
