HTC S620 User Manual page 82

88 Getting Connected
For WPA authentication or TKP, AES, or WEP data encryption, enter the
needed information in the remaining fields.
4. Select use IEEE 802.1x network access control to use Extensible
Authentication Protocol (EAP). Select the EAP type depending on the
type of authentication. Click finish.
To increase security on the Wi-fi network
The LEAP (Lightweight Extensible Authentication Protocol) feature of
Comm Manager helps increase security on your phone, and ensures that
nobody is able to access your network without your permission.
1. On the WLAN Settings screen, select lEAP.
2. Click Menu > New.
Note
3. Enter the SSID (Service Set Identifier).
You can obtain this information from your wireless service provider.
4.
Enter the user name, password, and domain.
5. Select an Authentication Type.
By default, the Authentication Type for your phone is Open System
authentication.
Note
By default, the LEAP screen displays data that you entered previously.
However, you can modify or delete the data as required by clicking Menu >
Modify or Menu > Delete on the LEAP screen.
For LEAP to work correctly, the receiving phone (your phone) must be set
with the same SSID, user name, and password as the access point.