Setting Date/Time (Clock Set) - Panasonic Lumix DMC-LS85 Operating Instructions Manual

Preparation
Note
• Do not turn this unit off, remove its battery or card or disconnect the AC adaptor (DMW-
AC6G: optional: P80) when the access indication is lit [when pictures are being read or
deleted or the built-in memory or the card is being formatted (P22)]. Furthermore, do
not subject the camera to vibration or impact. The card or the data on the card may be
damaged, and this unit may no longer operate normally.
• The data on the built-in memory or the card may be damaged or lost due to
electromagnetic waves, static electricity or breakdown of the camera or the card. We
recommend storing important data on a PC etc.
• Do not format the card on your PC or other equipment. Format it on the camera only to
ensure proper operation. (P22)
• Keep the Memory Card out of reach of children to prevent swallowing.
Setting Date/Time
• The clock is not set when the camera is shipped.
1
Turn the camera on.
• When you turn the camera on, [PLEASE SET
THE CLOCK] message appears. (It does not
appear in Playback Mode.)
A [MENU/SET]
button
B Cursor buttons
2
Press [MENU/
SET].
3
Press w / q to select the items (year, month, day, hour, minute, display
sequence or time display format), and press e / r to set.
C Time at the home area
D Time at the travel destination (P50)
4: Cancel without setting the clock.
• Select either [24HRS] or [AM/PM] for the
time display format.
• AM/PM is displayed when [AM/PM] is
selected.
4
Press [MENU/SET].
• After completing the clock settings, turn the camera off. Then turn the camera
back on, switch to Recording Mode, and check that the display refl ects the
settings that were performed.
• When [MENU/SET] has been pressed to complete the settings without the clock
having been set, set the clock correctly by following the "Changing the clock
setting" procedure (P15).
14
VQT1X23
(Clock Set)
B
Cq
Dw
A