燈具
LED light
Use metal wires to lead the LED cable wires thru the flight arms (boom) and affix with double
sided tape (Item#222180).
用細鐵絲將燈泡引出並用雙面膠固定於動力艙內。
RED LEDs (back)
紅燈
Install the LED control board inside
the frame body.
完成後將控制板置於機體內。
Payload Mount Set
Drill four 4mm holes into the canopy to install platform (Item#222202).
組合鋁柱,並用4mm鑽頭將艙罩鑽出四個孔後置入在鎖上平台。
(Option)
酬載架
(Option)
PM2 x 3.5 x 33
M2 x 5
P.21
G A UI
T AI SHIH HOBB Y CORPOR A TION
Connect to the receiver to control
LED light flash frequency.
接至接收機可控制白燈閃爍頻率
G A UI
T AI SHIH HOBB Y CORPOR A TION
4mm drill
4mm 鑽頭
WHITE LEDs (front)
白燈
Transparent Cover
透明罩
雙面膠
double sided tape
M2 x 5