Notes On Installation; Wiring Diagram - VIETA VC-HD9700BT User Manual

Notes on Installation

The unit is designed for 12V DC, negative ground operation system only.

Before installing the unit, make sure the vehicle is connected to DC 12V negative ground electrical system. The

negative battery terminal must be disconnected before making connections, which can reduce damage to the
unit due to short circuit.
Be sure to connect the color coded leads correctly according to the diagram. Incorrect connection may cause

the unit to malfunction or damage the vehicle electrical system. Be sure to connect the speaker (-) leads to the
speaker (-) terminal. Never connect the left and right channel speaker cables together or to the vehicle body.
Do not block vents or radiator panels. Blocking them will cause heat to build up inside the unit and may

damage it.
Precaution
This unit can play the following disc only:
Type of disc Label on the disc
DVD
VCD
MP3 MP3
MP4 MP4
CD
Note: 1. The unit is compatible with DVD. VCDI. 012. 013. 0, CD-R.PICTURE-CD version Disc.
2. The manual conforms to D VD, VCD,MP 3 and CD, If no D VD, VCD or MP 3 on some
models you should ignore them. While enjoying DVD, VCD,MP3 and CD, the display
will automatically identify the disc and indicate the corresponding words.
Do not attempt to modify the unit. Unauthorised

modification may damage the unit.
Stop the vehicle before carrying Out any operation

that could Interfere with your driving.
Do not operate the unit in extreme Temperature

inside the vehicle.
The operating temperature of the Unit is between

-20 o C to + 60 o C.
To enjoy optimum sound and Images while playing,

handle the Disc as follows:
Handle the disc by its edge to keep the disc Clean .
Do not touch the surface.
26
Recorded material Size of disc
Sound and moving 12cm
Pictures
Sound and moving 12cm
Pictures
Sound and moving 12cm
Pictures
Sound and moving 12cm
Pictures
Sound only 12cm
Do not use CD with paste residue Or ink on the

surface.
Do not use CD with labels or stickers Attached. It

may cause failure of the Loader mechanism.
(Shown in picture).
Clean the disc with cleaning cloth. Wipe each disc

from the center to outside. (Shown in picture)
DVD/Bluetooth/NFC Radio 7"

Wiring diagram

Standard Connect
Antenna Receptacle

Output Socket (female)

Fuse Holder (15)

Video Out Receptacle

Output Socket (male)

27
ENGLISH