Update Channel List; New Channel Message - Panasonic TX-40AX630E Ehelp

■
Analogue
Set Analogue channel manually after
Set Sound System
●
Normally set Colour System
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L'
1. Select the channel position with
2. Select the channel with
3. Search with /
4. Select Store with
Use Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●

Update Channel List

By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel List, Child
Depending on the signal condition, the update may not work properly.
●

New Channel Message

Selects whether to give a notification message when a new DVB channel is
found or not.
When a notification message appears, you can perform
●
List pressing OK.
Auto
and Colour System, and then perform this function.
to Auto.
Numeric
Channel Up /
.
/ and press OK
to make small adjustments to the tuning of an individual
Lock, etc.
- 80 -
Setup.
buttons.
Down.
to set.
Update Channel
Favourites Edit,