Table of Contents
Advertisement
3D
Note
Display the image (TV, external input, etc.) full-screen for viewing 3D.
●
If light appears to flicker under fluorescents or dimmers when using the 3D
●
Eyewear, change the setting of
Watching > 3D > 3D Settings
Do not exert pressure on or scratch the lens of the 3D Eyewear.
●
3D content will not be correctly visible if the 3D Eyewear is worn upside
●
down or back-to-front.
When viewing 3D images, make sure your eyes are at an approximately
●
horizontal level and keep a position where you do not see double images.
Do not wear the 3D Eyewear when watching something other than 3D
●
images. Liquid crystal displays (such as computer screens, digital clocks
or calculators, etc.) may be difficult to see while wearing the 3D Eyewear.
Do not use the 3D Eyewear as sunglasses.
●
3D effects may be perceived differently depending on the person.
●
Viewing 3D
You can enjoy viewing 3D images with contents or programmes
corresponding to the 3D effect by wearing the 3D Eyewear.
This TV supports Frame Sequential, Side by Side and Top and Bottom 3D
●
formats.
– Frame Sequential is the 3D format that the images for the left and right
eyes are recorded with the high definition quality and alternately played
back.
3D content of 4K format is not supported.
●
1. Turn the 3D Eyewear on and put it on.
Connection status and battery status are displayed on the bottom right
●
of the screen.
2. View the 3D images.
Safety precautions will be displayed when you first watch the 3D image.
●
Select
Yes
or
If you select Yes, this message will be displayed again in the same
condition after Mains Power On / Off switch is next turned on. Select
No
if you do not want to display this message again.
Turn off the 3D Eyewear after using it.
●
3D Refresh
No
to continue to view 3D images.
- 69 -
Rate.
Advertisement
Table of Contents
