LG LFC25765ST Owner's Manual page 12

Hex Socket Wrench Phillips Screwdriver
NOTE: It is always recommended that the doors be removed when it is necessary to move the refrigerator through a
narrow opening. If it is necessary to remove the handles follow the directions below.
NOTE: Handle appearance may vary from illustrations on this page.
DOOR HANDLE REMOVING
1. Removing Refrigerator Handle
Loosen the set screws with the
and remove the handle.
• NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1 /4 " Allen wrench.
Mounting
Fasteners
2. Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of
the handle with the 1 / 8 " Allen wrench and remove the
handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1 / 4 " Allen wrench.
REFRIGERATOR INSTALLATION
TOOLS YOU MAY NEED
10 mm
1 / 4 in
3 / 8 in
3 / 32 " Allen wrench
Set Screw
Allen Wrench
Flat Head Screwdriver
DOOR HANDLE INSTALLATION
1. Reinstalling Refrigerator Handle
Place the handle on the door by aligning
handle footprints to fit mounting fasteners and
tighten the set screws with a
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1 /4 " Allen wrench.
Mounting
Fasteners
2. Reinstalling Freezer Drawer Handle
Place the handle on the door by aligning
handle footprints to fit mounting fasteners and
tighten the set screws on the bottom of the
handle with a 1 / 8 " Allen wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1 / 4 " Allen wrench.
9
1/4 in
3 / 32 in
Allen Wrench
3 / 32
" Allen wrench.