Pack Contents; System Requirements - Siemens SE366 Quick Start Manual

Quick Start Guide

Pack contents

The package contains the following components:
u
One Gigaset SE366 WLAN,
u
One mains adapter (100 V - 240 V / 12V DC 1A),
u
One cable with RJ-45 jacks (CAT5),
u
One CD containing several documents (user guide, Das lokale Netzwerk konfigurie-
ren, warranty) and software for language selection.
u
This Quick Start Guide.

System requirements

To operate your Gigaset SE366 WLAN you need:
u
a PC with
– an IEEE 802.11n (draft, see note below), IEEE 802.11g or IEEE 802.11b compat-
ible wireless network adapter.
In order to benefit from the increased data throughput gained by using 802.11n
technology, we recommend using a Gigaset PC Card 300 or a Gigaset USB
Adapter 300.
Note:
Transmission standard IEEE 802.11n is still pending approval. This is due to
happen in the first half of 2008. Your Gigaset SE366 WLAN is ready to comply
with the new transmission standard. You might have to update the software for
your device (see user guide on the CD).
or
– an Ethernet link,
u
a Web browser for the configuration of your Gigaset SE366 WLAN (recommended
products are Microsoft Internet Explorer 6.0 or higher and Mozilla Firefox 1.0 or
higher),
u
for Internet access:
– a DSL or cable modem and a splitter (for DSL),
– the access data from your Internet service provider.
For experienced users
The default settings for the Gigaset SE366 WLAN are:
– IP address: 192.168.2.1
– Subnet mask: 255.255.255.0
– SSID: ConnectionPoint
– Password: admin
18