General Configuration - ShoreTel ShorePhone IP 8000 Configuration Manual

The default password is "1234" unless changed earlier
during initial configuration. Once the password has been

General Configuration

The following configuration steps are not mandatory but are
highly recommended.
Navigate to the Preferences/Appearance section of the menu
as shown in Figure 14 and apply the following settings:
1. Set the System Name to a string of your choice e.g. the name
of the conference room in which the phone is deployed.
entered the Home page dialog will be displayed as shown
in Figure 13.
Figure 13 – Configuration Startup Screen
2.
3.
Figure 14 – Preferences/Appearance Screen
Set the Phone number to the assigned extension for the
phone. This information appears on the Idle display of the
device. This should also be a number (extension) that was
defined in ShoreWare Director for the user created earlier in
the Individual User section.
Click on the "Save Changes" button to apply these settings.
IP 8000 Conference Phone Application Note—Page 10