Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
EN
Electrical connection
For safe and trouble-free operation of the
appliance, the following instructions on
the electrical connection must be be ob-
served:
Before connecting the appliance,
compare the connection data (voltage
and frequency) on the rating plate with
those of your mains power supply. The
data must correspond in order to avoid
damage to the appliance. If in doubt,
ask your electrical appliance retailer.
The mains socket must be protected
by at least a 10 A automatic circuit
breaker.
Ensure that the mains cable is undam-
aged and is not laid over hot surfaces
or sharp edges.
The connecting cable must not be
strained or bent.
Always unwind the mains cable com-
pletely before connecting the appliance
to the mains socket.
The electrical safety of the appliance
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
BEEM - Elements of Lifestyle

Startup

Unpacking
Remove the appliance, all accessory
parts and the user manual from the
box.
Remove all packaging materials and
protective foils from the product and
the accessories before using it for the
first time.
NOTE
Do not remove the rating plate or
any warning signs on the appliance.
If possible, keep the original packag-
ing during the guarantee period in or-
der to be able to pack the appliance
properly in the event of a guarantee
claim. Transport damage will invali-
date the warranty or guarantee.
Checking the delivery contents
Check for visible signs of damage or miss-
ing items.
Report incomplete or damaged contents to
your supplier immediately.
Before using for the first time
Clean the appliance and the accesso-
ries as described in the section Clean-
ing and care (page 22).
Before processing, put all fruit for mak-
ing sorbet into the freezer compart-
ment of the fridge for at least 12 hours.
Before freezing, cut the ingredients
into pieces to fit into the feed shaft.
Sorbet King
19

Advertisement

Table of Contents
loading

Table of Contents