Windows 10 Procedures - Fujitsu STYLISTIC Q775 Operating Manual

4. Inside the Auto Installer software package, launch FjAutoinstall.exe
as administrator.
5. Click [Yes] on the User Account Control dialog box. This will take some time to
process the software packages. A message will be displayed during this time
stating "Please wait while the content is being processed".
6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA,
otherwise continue.
7. The Fujitsu Software Auto Installer user interface will be launched providing the
ability to auto install the software downloaded from
support site.
8. It is recommended that you install all the software in the listed order. You can
"Select All", to install the software in the order listed.
9. Click the [Install] button to start the installation.
10. After installing all the selected drivers, the Installation Results window is
displayed. Click [OK].
11. "You must restart the system for the settings to take effect. Do you wish to reboot
now?" message appears. Select [Yes].
12. The system will now reboot.

Windows 10 Procedures

It is very important that you create your Recovery Drive before beginning to use
your system.
It is also important that you create a backup of the content of the "C:\Drivers" on your
system to writable media or an external drive. System-Specific Software Drivers are
also available for download through the Fujitsu support site.
Note: Most of the information below comes from the Microsoft page http://windows.
microsoft.com/en-us/windows-10/windows-10-recovery-options. Please refer to it for
more details.
126 Fujitsu