Operation And Controls; Before First Use - Princess 212700 User Instructions

General
With the Princess Food Processor and
Blender, you can prepare food in no time.
You can use it to cut, chop, grate, shred,
and cut slices.
You have all the accessories you need to
prepare food exactly as you wish. The
accessories can easily be stored in the
integrated storage tray.
The appliance is equipped with a two
speed electric drive unit and a pulse
function.
The anti-slip feet ensure that the appliance
is always stable during use.
The mixing bowl has a volume of
0.75 litres.
The blender function can be used to chop
vegetables and fruit, and to prepare
delicious shakes and juices.
The sharp stainless-steel knives enable
you to finely chop or puree both small and
large pieces of fruit and vegetables with
the greatest of ease.
A special function makes it possible to
grind ice cubes in the blender jug. This
function lets the blender run with short
intervals to give the ice the time to drop
back to the bottom of the jug.
This function can also be applied using the
mixing bowl with non liquid food.
The blender jug has a closable lid; during
blending the filling opening in the lid can be
used to add ingredients without spillage.
The blender jug has a volume of 1.2 litres.
Operation and
Controls
See Figure 1.
8
Article 212700 Princess Food Processor and Blender
The appliance is equipped with the
following features:
1 Slicer
2 Grater/shredder
3 Mixing bowl lid
4 Stopper
5 Mixing bowl
6 Drive unit
7 P(ulse) button with indicator light
8 II/ICE - Continuous high speed button
with indicator light / interval function
9 Stand-by indicator light
10 Power cord with plug
11 I - Continuous low speed button with
indicator light
12 Accessory storage tray
13 Blender jug
14 Blender lid
15 Blender lid insert
16 Knife
17 Accessory shaft

Before first use

1 Take the appliance out of the
packaging.
2 Make sure that the mains voltage is the
same as indicated on the type plate on
the appliance.
3 Clean the appliance. See 'Maintenance
and cleaning'.
Use
Cutting and chopping
1 Place the appliance on a flat, stable
surface where it cannot fall.
See figure 2.
2 Place the mixing bowl on the drive unit.
Rotate the mixing bowl clockwise as far
as possible.
3 Slide the knife over the accessory shaft
and push it downwards till the locks
click the knife in a fixed position.
Be careful when attaching and
removing accessories. The knife is
sharp.