NEC PlasmaSync 42XP10 User Manual page 20

On-Screen Display (OSD)
Main Menu Sub Menu
OPTION2 POWER SAVE
Available only
when the
Advanced OSD
FILM MODE
function is
enabled.
SCREEN SAVER
COOLING FAN
SIDE MASK
PICTURE SIZE
DVI MODE
PROTOCOL SET
CLOSED CAPTION
U.S. models only
CAPTION CONT
U.S. models only
OPTION3 TIMER
Available only
when the
Advanced OSD
function is
enabled.
INPUT DETECT
CONTROL LOCK
IR REMOTE
LOOP OUT
MONITOR ID
RS232C CONTROL
Sub Menu2 Sub Menu3
PLE
ORBITER
INVERSE WORKING TIME
/WAITING TIME
PLUG/PLAY
BLACK LEVEL
PRESENT DAYLIGHT
TIME SAVING
TIME
DAY/HOUR/
MINUTE
TIMER
INPUT
VOLUME
Explanation
Sets how long the monitor waits before going into power
save mode after a signal is lost.
VGA, RGBHV, and DVI input and Separate HV Sync. only.
Selects Film mode.
Use SCREEN SAVER functions to reduce the risk of image
retention.
PLE: The brightness is decreased in order of Lock mode.
(the higher number is darker)
ORBITER: The screen image moves and is slightly
squeezed or expanded.
INVERSE: The screen image is displayed alternately
between positive image and negative image, or the screen
image is displayed full white.
Cooling fan reduces the temperature of the display.
Adjusts the color of the side mask when a 4:3 image is
displayed.
Press + button, the bar will become lighter.
Press - button, the bar will become darker.
When it is set to "OFF", TRUE of picture size appears only
RGB signals.
Choose the DVI mode based on the input device
connected via DVI connector and set the black level.
When a PC or similar equipment is connected, the PLUG/
PLAY setting should be "DVI-PC" and the BLACK LEVEL
setting should be "LOW".
When a DVD player or similar equipment is connected,
PLUG/PLAY setting should be "DVI-HD" and the BLACK
LEVEL setting should be "HIGH".
Sets protocol setting for use with RS-232C connection.
OFF: When NEC protocol is used (normal).
ON: When special protocol is used.
Consult dealer for details of protocol.
Choose the closed caption setting.
Chooses the brightness of the closed captions.
Sets the date, time, and daylight saving region.
Day & time must be set in order for the "TIMER" function
to operate.
Creates a working schedule for the monitor to use. See
page 24 for instructions.
Sets the input mode and the sound volume when the
power is turned on.
LAST: Uses the input that was last selected when the
power was turned off.
MULTI to DVI: Fixed input mode.
AUTO: Automatically searches for the input signal.
PRIORITY: Sets which input has priority when using the
AUTO setting.
This function completely locks out access to all Control
Key functions. When this item is set to "ON", the front
panel is disabled as soon as the on-screen menu goes off.
When "OFF", prevents the monitor from being controlled
by wireless remote controller. The remote becomes
ineffective disabled as soon as the on-screen menu goes
off. To return to normal operation, press the "DISPLAY"
button on the remote controller for 5 seconds.
Change the loop out setting.
Sets the Monitor ID to a number from 1-26 and or to ALL.
Selects the mode of the monitor when using the RS-232C
daisy chain.
English-17
Default Reset
OFF YES
ON YES
AUTO YES
AUTO1 YES
OFF YES
AUTO NO
3 YES
ON YES
DVI-PC NO
LOW NO
OFF YES
OFF YES
NORMAL YES
OFF NO
NO
OFF YES
LAST YES
LAST YES
OFF YES
ON YES
OFF YES
ALL YES
NORMAL YES