Table of Contents
Advertisement
Installation
To use the device as a telephone ringer amplifier whilst
receiving a new call, the indoor unit will sound an alarm and
flash (depending on the Alarm mode setting)
Trouble shooting
Symptom
No incoming call
yet the AM20 rings
automatically or rings
continuously.
The shaker vibrates
automatically or
continuously.
The strobe LED flashes
continuously.
The red low battery
LED flashes
continuously.
Solution
1) Check the batteries are inserted
correctly.
2) Check the power adaptor is
connected correctly.
3) Turn off the power for 10 minutes
and then turn it back on.
1) Replace the batteries.
2) Turn off the power for 10 minutes
and then turn it back on.
12
Advertisement
Table of Contents
