Save / Delete User Point; Database Update - Kiyo GPS-700 User Manual

• Press the MENU button while driving at the location where you would like
to add a new warning point. This function is available only when the GPS
is linked with the satellite and the car speed is more than 10 kph, and if the
point is not already stored in the current database.
The unit will save the location with voice information: "USER POINT
ADDED". In case you hear "TING" you need to try again. Maximum 50
user positions can be stored.
• Press the MENU button while you hear voice notice of "USER POINT",
then the user point will be deleted with voice information: "USER POINT
DELETED". Function is available only when the GPS is linked with satellite
and car speed is more than 10 kph.
• You can delete all the user points using the RESET FACTORY SETUP
menu (21).
1. Downloading the Update Software
Visit "www.gps-detector.net" and download the update software.
2. Installing the Update Software
Unzip the downloaded ZIP file, and then start the "setup.exe" file. The
buttons and messages can be different due to the different Windows
language. Click on the [Next >] and then the [Install] button. The software
will be installed and an icon will be created on your Windows desktop.
3. Downloading the Latest Database
Visit "www.gps-detector.net", choose the right database of your country
and download the latest database update.

SAVE / DELETE USER POINT

DATABASE UPDATE

10