Displaying Disc Information On-Screen; Initial Settings; General Operation; Language - NEC NDV-28 Owner's Manual

Displaying Disc Information
on-screen
Some items can be changed using the menu.
1. Press DISPLAY during playback.
2. Press b / B to select an item.
The selected item is highlighted.
3. Press v / V to change the setting. Press ENTER.
You can also use the number buttons if
appropriate (e.g. inputting the title number).
: Title(Track) Number,
02/04
: Chapter Number (DVD disc only)
02/04
Note:
If no button is pressed for a few seconds, the on-
screen display disappears.

Initial Settings

By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 10 to 13.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.

General Operation

1. Press SETUP. The Setup menu appears.
2. Use b / B to select the desired option then press
V or ENTER to move to the second level. The
screen shows the current setting for the selected
item, as well as alternate setting(s).
3. Use v / V to select the second desired option then
press B to move to the third level.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP, RETURN or PLAY to exit the Setup
menu.
10

LANGUAGE

Menu Language

Select a language for the Setup menu and on-screen
: Time search
0:08:20

display.

Disc Audio / Subtitle / Menu

Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original – Refers to the original language in which
the disc was recorded.
Other – To select another language, press number
buttons then ENTER to enter the corresponding 4-
digit number according to the language code list
on page 19. If you enter the wrong language code,
press CLEAR.
DISPLAY

TV Aspect

4:3 – Select when a standard 4:3 TV is connected.
16:9 – Select when a 16:9 wide TV is connected.

Display Mode

Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox – Displays a wide picture with bands on
the upper and lower portions of the screen.
Panscan – Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit.
LANGUAGE
Menu Language English
Disc Audio Original
Disc Subtitle Off
Disc Menu Original
Move Select Exit
DISPLAY
TV Aspect 4:3
Display Mode Letterbox
Progressive Scan Off
TV Output Select YPbPr
Move Select Exit