Before Operation-DVD part
By using the DVD Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the Setup
menu, among other things. For details on each Setup
menu item, see pages 17 to 20.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General Operation
1. Press DVD on the remote control.
2. Press SETUP.
The Setup menu appears.
3. Use v / V to select the desired option then press B
to move to the second level. The screen shows the
current setting for the selected item, as well as
alternate setting(s).
4. Use v / V to select the second desired option then
press B to move to the third level.
5. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
6. Press SETUP or N
N exit the Setup menu.
LANGUAGE
LANGUAGE
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
Menu Language
Select a language for the VCR and DVD's setup menu
and information display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press number but-
tons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter (see page 35). If you enter the wrong
language code, press CLEAR.
Off (for Disc Subtitle) : Turn off Subtitle.
English
Original
Off
Original
Move
Select
DVD
17
Need help?
Do you have a question about the NDT-42 and is the answer not in the manual?