1. Press the menu button to select
2. Press the C / B buttons and then
3. Select EDIT with the PR y / x
buttons and press the C / B
buttons to start EDIT.
4. DELETE PROGRAM POSITION DATA.
Position the blue-line to the
program to delete with the PR
y / x buttons and the DELETE
5. CHANGING THE ORDER OF THE CHANNELS
Position the blue-line to a program to move with the PR y / x
buttons and the move button.
Press the PR y / x buttons to position the blue-line to another
program to exchange.
By pressing the MOVE button again, selected two program will
6. ENTER A STATION NAME
Locate the cursor to below NAME with the C / B buttons.
Using the PR y / x buttons, select the desired letter, number or
Press the B(right button) to select the next position.
7. SELECT THE PICTURE SYSTEM
Position the blue-line to the PICTURE to select with the C / B
buttons and change the picture (ex. PAL, SECAM, NTSC, ..) with
the PR y / x buttons or you can select the PICTURE mode with the
SYSTEM button on the remote controller.
8. SELECT THE SOUND SYSTEM
Position the blue-line to the SOUND to select with the C / B buttons
and change the SOUND (ex. BG, DK, I, M, ..) with the PR y / x
9. SKIPPING THE CHANNELS
You can select SKIP with the SKIP button in EDIT mode or
locate in the cursor to below SKIP with the C / B buttons and then
press the PR y / x buttons to skip the desired program.
A program marked with skip "V" is skipped when changing
channel using the program UP / DOWN(on normal operation).
Press the NUMBER buttons 0~9 or the PR y / x buttons to select
program number you want. The screen will change according to
the selected program number.
CONVENIENT PICTURE CONTROL
You can select the picture quality instantly.
TO SELECT THE PICTURE MODE
1. Press the SELECTABLE PICTURE
the desired picture quality.
Normal, Mild and Favourite can be selected cyclically.
2. Or press the MENU button to
select the PICTURE and then to
BY pressing the C / B buttons, the
following three mode change
3. You can select the BRIGHTNESS,
CONTRAST, COLOUR, and
SHARPNESS with the PR y / x
Select the desired item with the
PR y / x buttons and press with
the C / B buttons adjust the level.
) button at remote control to select