VIEWING TELETEXT(OPTION) / USE OF THE TELETEXT BUTTONS
M The teletext service is carried on a TV transmission signal, therefore it is only available when a TV program can
be received on your TV.
Your choice of TV program also governs which Teletext service you will receive.
TO SELECT THE TEXT MODE
First, turn on your TV SET and choose your TV program.
Then press the TEXT(
To select any other page, simply press the three of the PAGE SELECTOR
buttons or PR y / x buttons. The page number requested is displayed on the
upper left hand side of the screen.
To return to normal TV operation, the TEXT(
Note that if the new page requested is a news flash or a subtitle page,
the normal TV picture is automatically turned on and the news flash or
subtitle displayed in a box within the picture.
In Teletext mode, press the TEXT(
SCREEN mode and then to be displayed split screen.
In Teletext mode, the PAGE SELECTOR buttons are used to enter a
page number or a subcode.
During digit entry page, acquisition is stopped.
Or PR y / x buttons decrease or increase the current page number
When the INDEX(
Teletext decoder is set up to display the index page.
Press once for Main Index Page : press again for full index.
When the TV is in LIST mode, the teletext decoder is set up to
display the Red Bank.
In normal Teletext mode, TV picture and character data are not
In Teletext mode, if you press the PICTURE(
control brightness by pressing C / B buttons.
By pressing the SIZE button, either the top half or the bottom half of
the Text display can be expanded.
Press the SIZE(
Press again and the bottom half is expanded.
Press again and the display return to normal size characters.
)button to switch the receiver to Teletext mode.
)button is pressed.
)button to select the SPLIT
) button is pressed in the FLOF mode, the
) button allows a combined display of TV picture and
) button, you can
) button once and the top half of the display
Some Teletext pages play a role in concealing part of the display in,
for example, a quiz page with concealed answer.
) button releases the concealed text as long as the
) button is not again.
Some Teletext pages contain more information than can be
displayed simultaneously and are therefore sub-divided into a series
of two or more pages.
The first sub-page of a series of four sub-pages will. For example, be
indicated by a 1 / 4 displayed on the top right hand side of the next
page. These sub-pages are automatically rotated, each page being
displayed for a set time before being replaced by the next page. If you
need to read a certain page for longer than allowed, or retain a
particular sub-page, then the HOLD(
) button should be pressed.
) symbol will be displayed on the top left hand side
instead of the page number and page acquisition will be stopped.
Normal operation is restored by pressing the HOLD(
or by entering a new page number.
) button suppresses the Text display and restores
the normal TV picture while the receiver remain in the Teletext mode.
This function allows you to request Teletext page and after Teletext
controls without interrupting a TV program.
To return to normal TV operation, the CANCEL(
) button is pressed
For Teletext information witch is longer than one page, it may take
some time for the automatically changing of sub-pages to reach the
sub-page you require.
It is possible, however, to enter the sub-page you require and
continue watching a normal TV program until the correct sub-page
has been reached.
) button, the character S
left side, while character --:-- will appear on the right. Enter the desire
sub page number. EG. To select sub page 10, press 0,0,1,0.
) button to return to normal TV program. When the
requested sub-page is reached, the main page number will be super-
imposed on the normal TV picture. Press the Teletext(
display the stored sub-page.
) button again
will appear in the
) button to