Charge Displays; Charging The Batteries - Swissvoice Babycom 268 User Manual

Charge displays

In charge
(unit is turned on)
In charge
(unit is turned off)
Fully charged
(unit is turned on)
Fully charged
(unit is turned off)

Charging the batteries

When the batteries are low, the following display is shown:
Baby unit
flashing
You must charge the batteries within the next 5 minutes; otherwise the
device will automatically switch off.
Note:
- Non-rechargeable batteries must not be charged up.
- Remove discharged batteries as they can leak and damage the unit.
- No alarm signal is emitted on the baby unit when the batteries are
discharged!
The battery icon loops and flashes.
The battery icon loops and flashes.
The battery icon is full and stops flashing.
The battery icon is full and stops flashing.
Parental unit
or
or
Babycom 268
51