Table of Contents
Advertisement
G RGB 2
R, G, B, H/CS and V IN (BNC).....These are analog RGB input terminals.
Connect external components with R, G, B, H/CS, and V output terminals to
these analog RGB input terminals. Be sure that the RGB connection cable is
correctly attached to the corresponding terminals.
R, G, B, H/CS and V THROUGH OUT (BNC)..... Connect to a second monitor's
RGB inputs to relay the RGB signal inputs at R, G, B, H/CS and V IN.
75
/HIGH Impedance Select Switchs for RGB and H/CS&V..... Set to "75
during normal operation. In multiple connections using R, G, B, H/CS and V
IN and OUT terminals, set to "HIGH" on all but the last monitor. Set to "75 "
on the last monitor only.
H External Speaker Terminals
+ RIGHT.....Connect RIGHT speaker positive wire here.
- RIGHT.....Connect RIGHT speaker negative wire here.
- LEFT.....Connect LEFT speaker negative wire here.
+ LEFT.....Connect LEFT speaker positive wire here.
I Internal Speaker Terminals
To enable the internal speakers, use the supplied speaker cables to con-
nect between the external speaker terminalsH and here.
J AC Input
Connect the supplied power cord' s three-pin plug here.
G
"
J
I
9
H
10
Advertisement
Table of Contents
