LG LWHD1006R Training Manual page 15

INSTALL THE CABINET
• Open the window.
• Mark the centerline on the sill.
Place the cabinet in the window
and align it with the centerline.
• Attach the cabinet to the sill with
wood screws (Type B).
• Lower the window to allow the
sash to fall behind the upper guide
so the cabinet can rest against it.
• Thread the nut onto the bolt and
thread the bolt into the sill support.
(Do this for both sides.) Use this
bolt to adjust the cabinet height so
it hangs out of the window with the
back (outside) slightly lower than
the front (inside).
• Use 2 screws to attach the sill
support to the bottom of the
cabinet from the inside. You may
have to slide it forward or back to
get it in the correct place.
• Attach the cabinet to the window
sill by driving 3 Type B screws
through the front angle of the
cabinet into the window sill.
• Attach the frame curtains to the
window sash (top) and track
(bottom) using Type C screws.
LWHD1006R Page 13 of 40 Training Manual