Batteries; Transport; Ambient Conditions - Sonoro iElements Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 28
To prevent a fire hazard, disconnect the device completely from the power supply if you
do not use the device for a prolonged period of time. To this purpose remove the mains
plug from the mains socket.

2.5 Batteries

Remove the batteries from the battery compartment as soon as they are empty or if you
do not intend to use the device for a prolonged period of time.
Never dispose of any batteries in an open fire and never expose them to high
temperatures.
Never attempt to recharge normal batteries. Never attempt to open or short-circuit the
batteries. Risk of explosion!
Liquid discharged from the batteries when they are used incorrectly can cause skin
irritation. If you come in contact with the liquid, wash it off with generous amounts of
water. If the liquid gets into your eyes, never rub your eyes, but rinse them straight away
with water for 10 minutes and contact a doctor immediately.

2.6 Transport

To prevent damage to the inserted medium, remove it from the device before transport or
shipping.
When transporting the device in a car, store it in a safe place and ensure that it cannot
injure passengers.
If you send the device by mail, pack it in its original packaging. To this purpose always
keep the original packaging.

2.7 Ambient conditions

Safe operation of the device is only ensured if it is used under suitable ambient conditions.
To this purpose observe the following:
Protect the device against the effects of the weather. Never use the device outdoors and
never place it where it is exposed to strong sunlight.
Never place the device on or near heat and fire sources such as burning candles, cooker
plates, ovens etc.
Position the device so that sufficient air circulation is ensured. This will prevent heat
accumulating inside the device. Always keep the device at a minimum distance of 10 cm
from other equipment or walls.
Protect the device against mechanical shocks and place it on firm surfaces.
7

Advertisement

Table of Contents
loading

Table of Contents