Replacing The Nintendo Ds Rechargeable Battery Pak; Using The Nintendo Ds Stylus (Ntr-004) And Touch Screen - Nintendo DS Manual

NTR_HW_Manual_EUR-A 20.06.2006
4

Replacing the Nintendo DS Rechargeable Battery Pak

If it becomes necessary to replace the Rechargeable Battery Pak, use the following procedure. This
procedure should be performed by an adult. Replacement Battery Paks are sold separately. Please
contact your Nintendo Service Centre for further information on where to purchase a replacement. If
COPY
you do not want to replace the Battery Pak on your own, you may send your Nintendo DS to the
Nintendo Service Centre to have the Battery Pak exchanged by an authorised technician.
1. Always turn the power off and disconnect the Power Supply before replacing the Battery Pak.
2. Using a precision screwdriver, loosen the screw on the Battery Cover (Illustration 4). Remove
the Battery Cover and retain. Always use an appropriate screwdriver for the screw. Using
the wrong screwdriver may damage the head of the screw and you will not be able to remove
the Battery Cover.
3. Use the protrusion at the end of the Battery Pak to remove it from the Nintendo DS.
(Illustration 5)
4. Insert a new Rechargeable Battery Pak into the Nintendo DS. Make sure to orient the battery
correctly, as shown in illustration 6.
5. Replace the Battery Cover in its original position and carefully tighten the screw.
Illustration 4
Illustration 5
12
09:35 Uhr Seite 12
Illustration 6
5

Using the Nintendo DS Stylus (NTR-004) and Touch Screen

The lower LCD screen, or Touch Screen, is touch sensitive. For Nintendo DS games that include this
game control feature, operate the screen by using the included Nintendo DS Stylus.
Lightly touch or slide the Nintendo DS Stylus across the Touch Screen. (Illustrations 7 and 8)
Illustration 7
IMPORTANT NINTENDO DS STYLUS AND SCREEN GUIDELINES:
• ONLY use the Nintendo DS Stylus on the LOWER Touch Screen.
• Use only enough pressure to operate the game. Excessive pressure may damage
the Touch Screen.
• Do not use the Nintendo DS Stylus if it is broken.
• Use only a Nintendo-licensed stylus on the Touch Screen.
• Replace the Nintendo DS Stylus in the stylus holder when not in use.
• If you use a screen protector on your Nintendo DS, use only a Nintendo-licensed screen protector,
and use it only on the Touch Screen.
SCREEN CLEANING PROCEDURE:
If the screens on your Nintendo DS have visible smudges, fingerprints, or other foreign material on
them, you can clean them by using a soft clean cloth such as a lens or eyeglass cleaning cloth.
1. Slightly dampen the cloth with water ONLY and wipe off the screens to loosen any dirt or foreign
material.
2. Using a dry cloth, wipe the screens to dry them and finish the cleaning process. If needed, repeat
the process.
If your Touch Screen is not responding properly, and you have found foreign material between the
Touch Screen and the housing of the Nintendo DS, please review the cleaning instructions on our
web site at www.nintendo-europe.com/consumerinformation.
Illustration 8
13