Setup Using Aoss; Nintendo Ds Connections; Other Information - Nintendo 3DS XL Operation Manual

Setup using AOSS™

Setup is easy if you use a wireless router that includes the AOSS feature. This is found on many routers sold under the Buffalo™ brand
name. Read the instruction manual for your router for additional information about using AOSS.
NOTE: If you use AOSS, your access point settings may sometimes change. Computers and other devices connected without
using AOSS sometimes lose the ability to connect to the Internet and may need to be reconfigured. (If you configure
your settings by using Search for an Access Point, your access point settings will not change.)
If you are using the guided setup Tutorial, proceed to step 2.
Tap to begin AOSS configuration.
1
On your AOSS-compatible router, press the AOSS button.
2
Hold down the AOSS button until the corresponding LED blinks twice.
If the connection fails repeatedly, wait about five minutes and try again.
When a Settings Complete screen appears on your system, tap OK to run a connection test. If the
3
connection test succeeds, setup is complete.
NOTE: The connection test may fail if you try to connect immediately after finishing setup. Wait one or two minutes before trying
the connection test.
50
AOSS Button

Nintendo DS Connections

If you are using Nintendo DS software that supports game play over the Internet, tap this option.
NOTE: Nintendo DS software only supports WEP security. To connect to the Internet and play
Nintendo DS software, please configure your Nintendo DS Settings and then make sure your
access point is set up to use WEP security.

Other Information

Tap this option to agree to or review the Nintendo 3DS
Service User Agreement, or to confirm the MAC address
for the Nintendo 3DS XL system. (The MAC address is a
unique number assigned to all devices that connect to
the Internet.)
51