Bluetooth™ Wireless - Motorola i1 Manual

Bluetooth™ wireless
lose the wires and go wireless
Quick start: Bluetooth wireless
Settings > Wireless controls
Find it: >
> Bluetooth settings
Bluetooth settings
Bluetooth
Device name
(#########) 38.4 MHz Class 1.5
Discoverable
Make device discoverable
Scan for devices
Bluetooth devices
(found device name)
Pair with this device
Turn Bluetooth power on or off
Settings > Wireless controls
Find it: >
> Bluetooth
Note: To extend battery life, turn Bluetooth power off
when not in use.
40 Bluetooth™ wireless
Touch to turn on & scan
Touch to re-scan.
Touch to connect.
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, see "Reconnect devices" on page 40.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
Settings > Wireless controls
2 Touch >
> Bluetooth settings.
Touch Bluetooth to turn on and scan. If Bluetooth is
3
already on, touch Scan for devices.
4 Touch a device to connect.
If necessary, touch OK, or enter the device passkey
5
(like 0000) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status bar.
Note: Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
Reconnect devices
To automatically reconnect your phone with a paired
device, simply turn on the device.