External Speaker Connections - NEC MultiSync XP29, XM29 Plus User Manual

Nec display solutions user's manual multimedia monitor multisync xp29 plus, multisync xm29 plus
Hide thumbs Also See for MultiSync XP29, XM29 Plus:
Table of Contents

Advertisement

External Speaker Connections

External speakers may be connected to the monitor to reproduce sound from
VIDEO 1, VIDEO 2, RGB 1 or RGB 2 signal sources.
External speakers may be connected directly to the EXTERNAL SPEAKERS
terminals or indirectly by connecting a stereo system amplifier to the audio
outputs.
WARNING: Speakers that are installed next to the monitor must be
shielded against electromagnetic field which can cause color distortion in
the CRT and is not covered under the warranty.
To connect external speakers directly to the monitor:
1. Strip the ends of the speaker wires.
2. Press down a button below the EXTERNAL SPEAKERS terminals, insert
the speaker wire and release the button to secure a speaker wire connec-
tion:
[a] Connect the right speaker (located at right side of the monitor when
viewed from the front) positive (+) wire to RIGHT +.
[b] Connect the right speaker negative (-) wire to RIGHT -.
[c] Connect the left speaker negative (-) wire to LEFT -.
[d ]Connect the left speaker positive wire (+) to LEFT +.
3. Set SPEAKER SELECT switch at EXT.
If non-shielded speakers are used, they must be located a minimum of 4 feet
away from the monitor.
CAUTION: Unplug the monitor and all connected components before con-
necting external speakers. Use only speakers with 8-ohm impedance and a
power output rating of 5 watts or more.
VIDEO or
RGB AUDIO L and R outputs of XP29Plus/XM29Plus
LINE OR
LINE OR
AUX INPUT
AUX INPUT
L
R
STEREO AMP
AFHUJTT
2Q
2Q
DFFGGGG
2Q
2Q
To connect the monitor to stereo system speakers:
1. Connect L AUDIO output to the stereo amplifier L AUX input.
2. Connect R AUDIO output to the stereo amplifier R AUX input.
3. Set SPEAKER SELECT switch at EXT to use external speakers only. For
center channel audio fill, set SPEAKER SELECT at INT for sound from both
monitor and external speakers.
IMPORTANT: Do not connect speakers to both the monitor EXTERNAL
SPEAKERS terminals and to the stereo amplifier. This could damage both
the monitor and the speakers.
R
L (MONO)
IN
OUT
JGHDYSTEOYII DYASGHIROYUKIAIZAWA
DFFGGGG
ADFGRTRYT
HJJKKKASDFFF
ZZXXC
CCVDFVFF
AFHUJTT
ADFGRTRYT
BNGGDFDFGHY
SFGHHHJJ
SFGHHHJJ
25
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp29 plus, xm29 plusXm2960Xp2990Multisync xp29 plus

Table of Contents