Geometry Controls; Tools 1 - NEC MultiSync P750 User Manual

decrease the adjustment or selects the color setting (1 through 5).
Reset: Resets the current color setting to the factory setting.
NEC's AccuColor ® control system allows you to change your on-
screen colors by adjusting the monitor's red, green and blue color
guns individually. You can also access five industry standard
color temperature settings.

Geometry Controls

Geometry Controls Menu
The Geometry controls allow you
to adjust the curvature or angle of
the sides of your display.
Sides In/Out (pincushion): Increases
or decreases the curvature of the
sides either inward or outward.
Sides Left/Right (pincushion balance): Increases or decreases the
curvature of the sides either to the left or right.
Sides Tilt (parallelogram): Increases or decreases the tilt of the
sides either to the left or right.
Sides Align (trapezoidal): Increases or decreases the bottom of
the screen to be the same as the top.
Rotate (raster rotation): Rotates the entire display clockwise or
counterclockwise.
11
Note on Controls in the Geometry Controls Menu:
Exit: Exits to the main menu.
Cursor / : Moves the highlighted area up/down to select
one of the choices.
Cursor +/–: Moves the bar in the + or – direction to increase or
decrease the adjustment.
Reset: Resets the current highlighted control to the factory setting.

Tools 1

Provides a list of optional adjustments which include the following:
Language: OSM controls menus are available in 6 languages.
™
OSM Position: You can choose where you would like the OSM
controls image to appear on your screen. Selecting OSM Position
allows you to manually adjust the OSM controls menu left, right,
up or down.
OSM Turn Off: The OSM controls menu will stay on as long as it
is in use. In the OSM Turn Off sub-menu, you can select how
long the monitor waits after the last touch of a button to shut off
the OSM controls menu. The preset choices are 10, 20, 30, 60,
120 seconds.
OSM Lock Out: This control completely locks out access to all OSM
controls functions. When attempting to activate OSM controls while
Controls