NEC MultiSync LCD2470WNX, LCD2470WVX User Manual page 13

Nec display solutions user's manual monitor multisync lcd2470wnx, multisync lcd2470wvx
Hide thumbs Also See for MultiSync LCD2470WNX, LCD2470WVX:
Table of Contents

Advertisement

Available languages

Available languages

DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE
Adjust this setting to increase or decrease the horizontal size.
FINE
Adjust this setting to improve focus, clarity, and image stability.
AccuColor
Control Systems
®
AccuColor
Control Systems: Six color presets select the desired color setting (sRGB
®
and NATIVE color presets are standard and cannot be changed).
R,G,B: Increases or decreases Red, Green or Blue color depending upon which is
selected. The change in color will appear on screen and the direction (increase or
decrease) will be shown by the bars.
NATIVE: Original color presented by the LCD panel that is unadjustable.
sRGB: sRGB mode dramatically improves the color fi delity in the desktop
environment by a single standard RGB color space. With this color supported envi-
ronment, the operator could easily and confi dently communicate color
without further color management overhead in the most common situations.
Tools
SHARPNESS: This function allows the adjustment of the crispness of the displayed
image at any time. The image can be as distinct or as soft as the user prefers. The
amount of image adjustment is different depending on whether EXPANSION Mode
is set to OFF, FULL or ASPECT.
EXPANSION MODE: Sets the zoom method.
FULL: The image is expanded to 1920 x 1200, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
OFF TIMER: Monitor will automatically power-down when the end user has
selected a predetermined amount of time.
LED BRIGHTNESS: Adjusts the Green LED brightness.
HOT KEY: You can adjust the brightness and contrast directly. When this function is
set to ON, you can adjust the brightness with left or right control and contrast with up
or down control while the OSD menu is off.
INPUT RESOLUTION: Sets priority of the input signal to one of the following
resolutions:
1360 x 768, 1680 x 1050: Determines the resolution to 1360 x 768, 1680 x 1050.
1280 x 768, 1680 x 1050: Determines the resolution to 1280 x 768, 1680 x 1050.
1024 x 768, 1400 x 1050: Determines the resolution to 1024 x 768, 1400 x 1050.
Controls
11
- continued

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents