Yamaha SRT-700 Owner's Manual page 11

(power) key
Turns on or off (standby) the unit.
Turned on
Indicator of the selected input source lights up (green)
Bluetooth standby (p.11)
Lights up (red)
Turned off
DIMMER key
Switches the brightness of the indicators. Pressing
the key each time switches the status of the
indicators as follows.
Dim (default setting) → Off → Bright
↑
Indicators illuminate bright just after the operation
and become the set brightness after a few
seconds.
SURROUND and STEREO keys
Switch between surround and stereo
(2 channel) playback. When surround playback is
selected, you can enjoy a realistic sound effect using
Yamaha's exclusive AIR SURROUND XTREME.
SURROUND
Lights up (surround playback)
STEREO Off (stereo playback)
HINT
• When 2 channel stereo signals are played in surround,
the PLII indicator lights up.
Lights up (Dolby Pro Logic II)
• By installing the dedicated free application "HOME
THEATER CONTROLLER" to a device, such as a
smartphone, you can choose the following surround modes:
TV PROGRAM, MOVIE, MUSIC, SPORTS, and GAME.
4
BASS EXTENSION key
Enables/disables the bass extension function.
When this function is enabled, you can enjoy a powerful
bass sound with the Yamaha original bass boost
technology "Advanced Bass Extension Processing."
Lights up (enabled)
Off (disabled)
CLEAR VOICE key
Enables/disables the clear voice function.
When this function is enabled, you can enjoy clear
voice sounds while watching movies, TV dramas,
news programs or sports programs.
Lights up (enabled)
CLEAR
VOICE
Off (disabled)
CLEAR
VOICE
AUDIO DELAY key
Adjusts the audio delay to synchronize the sound
with the video when the video image on the TV
may seem delayed with respect to the sound.
5
Follow the procedure below to adjust the audio delay.
1 Hold down the AUDIO DELAY key for more
than 3 seconds.
The left most indicator flashes.
2 Press the SUBWOOFER (+/-) key to adjust the
audio delay.
Pressing the SUBWOOFER (+) key delays the
audio output timing.
(–)
3 To finish the adjustment, press the AUDIO
DELAY key.
HINT
• The adjustment will be finished automatically if no
operations are performed for 20 seconds.
6
MUTE key
Mutes the audio output. Press the key again
to unmute.
Decoder indication
The unit supports the following audio signals. You can
check the type of the input audio signal by the color of
the indicator.
★
(+)
Flash (on mute)
Green (Dolby Digital)
Off (PCM)
7
9