Specifications - NEC MultiSync JC-22W72 User Manual

Specifications

Monitor
Specifications
Picture Tube
Viewable Image Size:
Input Signal
Display Colors Analog and Digital input:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
7A811011.WPC
MultiSync ®
Monitor
Diagonal: 22 inch/55.3 cm
20 inch/50.8 cm
Radius: 57800 mm
Video: ANALOG 0.7 Vp-p/75 Ohms,
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Sync on Green video (Positive) 0.7 Vp-p
and sync. (Negative) 0.3 Vp-p
Over 16 million colors
Horizontal: 31 kHz to 115 kHz
Vertical: 55 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
(Analog)
800 x 600 @ 55 to 160 Hz
832 x 624 @ 55 to 160 Hz
1024 x 768 @ 55 to 143 Hz
1152 x 870 @ 55 to 125 Hz
1280 x 1024 @ 55 to 107 Hz
1600 x 1200 @ 55 to 92 Hz ...................... NEC cites recommended for at
1792 x 1344 @ 55 to 81 Hz
1800 x 1440 @ 55 to 76 Hz
1856 x 1392 @ 55 to 78 Hz
1920 x 1440 @ 55 to 76 Hz
(Digital) 640 x 480 @ 60 to 160 Hz
800 x 600 @ 55 to 160 Hz
832 x 624 @ 55 to 160 Hz
1024 x 768 @ 55 to 143 Hz
1152 x 870 @ 55 to 120 Hz
1280 x 1024 @ 55 to 85 Hz
1600 x 1200 @ 55 to 60 Hz
Horizontal: 396 mm/15.6 inches
Vertical: 297 mm/11.7 inches
406 mm/16.0 inches
305 mm/12.0 inches
AC 100 – 120 V/220 - 240 V, 50/60 Hz
2.3A @ 100 – 120 V/1.0A @ 220-240 V
483 mm (W) x 501 mm (H) x 472 mm (D)
19.0 inches (W) x 19.7 inches (H) x 18.6 inches (D)
32.4 kg
71.4 lbs
+10 C to +35 C/+50 F to +90 F
Humidity: 30% to 80%
Altitude: 3,000 m/10,000 Feet
-20 C to +60 C/-4 F to +140 F
Humidity: 10% to 90%
Altitude: 13,700 m/45,000 Feet
NOTE: Technical specifications are subject to change without notice.
13
15
FP ™ Notes
1350X
90 deflection, 0.25 - 0.27 mm (variable)
grille pitch, medium short persistence
phosphor, aperture grille CRT, multi-layered,
anti-static screen coating, semi-dark-tint
screen, and OptiClear
Digital Input:TMDS
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
85 Hz for optimal display performance
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
5/18/00, 12:26 PM
® screen surface.
™