Manual Recording - Sanyo DC X900 Instruction Manual

6, Repeat steps 4-5 to programme the tracks to be recorded onto side -
If a track exceeding the remaining time on side B is selected, the
A.
SIDE B indicator blinks.
If a track exceeding the remaining time on
side
A is selected, the
8. Press the PIAY/PAUSE switch. Recording starts automatically.
SIDE A indicator blinks.
When the MEMORY switch is pressed, the SIDE A indicator goes -
The track numbers can also be set using the SKIPEARCH switches
out and SIDE B lights. This and subsequent tracks are recorded on
on the main unit.
side B.
It is impossible to change and to add programmed.
7. Repeat steps 4-5 to programme the tracks to be recorded onto side
B.
MANUAL RECORDING
For programmed recording, programme the material in advance (as -
When
the CD player is setto the stop or pause mode during recording,
described under "PROGRAMMED PLAY").
Deck 2 pauses. When CD play is resumed, Deck 2 recording also
1. Press the CD function switch.
resumes.
2. Press the REC/PAUSE switch of the deck. (Deck 2 enters the record - This method produces a gap in recording when the tape reverses.
pause mode.)
3.
Press the PIAY/PAUSE switch of the CD player. CD recording starts.
--
-12-