NEC MultiSync EA191M-BK User Manual page 9

5. To keep the cables neatly organized, place them into the cable management system that is built into the stand.
Place the Power cord into the specific hooks, as indicated in Figure C.2/Figure C.3.
Place the D-Sub and the DVI cables into the specific hooks, as indicated in Figure C.2/Figure C.3.
6. Make sure all cables are resting flat against the stand (Figure C.2).
Please check Tilt, Rise and Lower monitor screen and screen rotation when you manage cables.
Audio Input
Power Cord
Figure C.2
7. Hold the all cables firmly and place the cable cover onto the stand (Figure D.1). To remove the cable cover, lift the cover
off as shown in Figure D.2.
Figure D.1
D-SUB Cable
DVI Cable
Flat
Insert Top First
English-7
D-Sub Cable
DVI Cable
Flat
Power Cord
Figure C.3
Figure D.2