NEC MultiSync LCD4010 User Manual page 27

CONFIGURATION 2
LONG CABLE
MANUAL
*:INPUT RGB2/3 only
CONFIGURATION 2
OSM TURN OFF
CONFIGURATION 2
INFORMATION OSM
CONFIGURATION 2
OFF TIMER
CONFIGURATION 2
DVI MODE
*:INPUT RGB1 only
CONFIGURATION 2
OSM POSITION
LONG CABLE MANUAL
LONG CABLE ON/OFF
RED DELY
GREEN DELAY
LONG CABLE MANUAL
BLUE DELAY
OSM TURN OFF
RED SHARPNESS
INFORMATION OSM
GREEN SHARPNESS
OFF TIMER
BLUE SHARPNESS
OSM POSITION
SOG PEAK
INPUT DETECT
VIDEO EQ.
MONITOR INFORMATION SYNC TERMINATE
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU :SEL + -:ADJ
LONG CABLE ON/OFF OSM TURN OFF
LONG CABLE MANUAL
OSM TURN OFF
INFORMATION OSM
OFF TIMER
OSM POSITION
INPUT DETECT
+ -:ADJ
MONITOR INFORMATION
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
LONG CABLE ON/OFF
INFORMATION OSM
LONG CABLE MANUAL
OSM TURN OFF
ON
INFORMATION OSM
OFF
OFF TIMER
OSM POSITION
INPUT DETECT
:SEL + -:ADJ
MONITOR INFORMATION
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
LONG CABLE ON/OFF
OFF TIMER
LONG CABLE MANUAL
OSM TURN OFF
ON
INFORMATION OSM
OFF
OFF TIMER
OSM POSITION
INPUT DETECT
:SEL + -:ADJ
MONITOR INFORMATION
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
OSM TURN OFF
DVI MODE
INFORMATION OSM
OFF TIMER
DVI-PC
DVI MODE
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
+ -:SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
OSM POSITION
LONG CABLE ON/OFF
LONG CABLE MANUAL
OSM TURN OFF
INFORMATION OSM
LEFT
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU + - :ADJ
English-25
To compensate for image degradation, which is caused by
using a long cable.
RED/GREEN/BLUE DELAY
To adjust the each phase of RED, GREEN and BLUE
signal.
LEVEL: 0 - 6
RED/GREEN/BLUE SHARPNESS
To adjust the each performance degradation of RED,
GREEN and BLUE signal.
0 LEVEL: 0 - 45
2
0
0
0
SOG PEAK
0
0
0
To adjust the shape of Sync on Green signal.
HI / LO
:RETURN :EXIT MENU
EXIT MENU
Level: 0 - 1
VIDEO EQ (Input RGB 3 only)
To optimize the shape (Tailing) of RED, GREEN and
BLUE signal.
Level: 0 - 7
SYNC TERMINATE (Input RGB 3 only)
To select the terminate resistance for matching the cable
impedance.
HI: 2.2K ohm/LO:75 ohm
The OSM control menu will stay on as long as it is use.
In the OSM Turn Off submenu, you can select how long
10 SEC. the monitor waits after the last touch of a button to shut
off the OSM control menu. The preset choices are
:RETURN :EXIT MENU
EXIT MENU
10 -240 seconds.
Selects the information OSM display or not. The
information OSM will display when input signal or
10 SEC.
source change or warning message like as no-signal or
out-of range.
EXIT :RETURN MENU :EXIT MENU
A time between 3 to 10 seconds is available.
To select OFF TIMER mode ON/OFF.
In the OFF TIMER menu, you can preset the monitor to
automatically power down.
1 HOUR
A time between 1 to 24 hours is available.
:RETURN MENU :EXIT MENU
EXIT
When the OFF TIMER is set, the SCHEDULE
(see page 28) settings will be disabled.
Selects the kind of DVI-D equipment which is connected
RGB1.
Select "DVI-PC" when PC or other computer equipment
/ DVI-HD
is connected.
EXIT :RETURN :EXIT MENU
MENU
Select "DVI-HD" when DVD player, which has DVI-D
output, is connected.
Adjusts the position of the OSM menu.
UP
Press + button to move right side of the screen.
Press - button to move left side of the screen.
RIGHT
Press button to move right side of the screen.
DOWN
EXIT :RETURN MENU :EXIT MENU
Press button to move left side of the screen.