JVC KD-G400 Service Manual page 7

QQ
3 7 63 1515 0
3.1.4 Removing the side panel
(See Fig.5)
• Prior to performing the following procedure, remove the front
panel assembly as required.
(1) From the left side of the main body, remove the two screws
C and screw D attaching the side panel.
3.1.5 Removing the rear bracket
(See Fig.6)
• Prior to performing the following procedure, remove the bottom
cover.
(1) From back side of the main body, remove the three screws
E, three screws F and three screws G attaching the rear
bracket.
(2) Remove the rear bracket.
3.1.6 Removing the main board
(See Figs.6 and 7)
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis assembly and
side panel.
• Remove the front chassis assembly as required.
TE
(1) Remove the three screws E attaching the rear bracket on
L 13942296513
the back side of the main body. (See fig.6.)
(2) From the bottom side of the main body, remove the two
screws H attaching the main board. (See fig.7.)
(3) Disconnect the connector CN501 from the CD mechanism
assembly and remove the main board. (See fig.7.)
Reference:
Remove the rear bracket from the main body as re-
quired.(SeeÅh2.1.5 Removing the rear bracketÅh.)
www
.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
C D
Side panel
F
E
Q Q
3 6 7 1 3 1 5
CN501
H
co
.
9 4 2 8
C
Fig.5
G
F
G
Rear bracket
Fig.6
Main board
0 5 8 2 9 9 4 2 8
Fig.7
m
(No.MA074)1-7
9 9
G
E
9 9
H