Pairing; What Is Pairing; Pairing Procedures - Sony TMR-BT8iP Operating Manual

Pairing

What is pairing?

Bluetooth devices need to be "paired" with each other beforehand.
Once Bluetooth devices are paired, there is no need for pairing
again, except in the following cases:
 Pairing information is deleted after repair, etc.
 This unit is paired with 9 or more receiving devices.
This unit can be paired with up to 8 Bluetooth receiving device. If a
new device is paired after 8 devices have been paired, the device whose
latest connection time is the oldest among the 8 paired devices is
replaced by the new one.
 This unit is initialized.
All pairing information is deleted (page 21).

Pairing procedures

1
Turn on the power of iPod.
(Make sure the iPod is in pause mode)
2
Connect this unit to the iPod (page 8).
3
Place this unit and the Bluetooth receiving device to be paired
together within 1 m (3 ft).
4
Set the Bluetooth receiving device to enter "Pairing in process."
See the operating instructions supplied with the Bluetooth receiving
device.
 Tip
For Sony Wireless Stereo Headset
10
GB