Advertisement
From serial number 80215.0000 a EMZ Door Catch and Latch were used in production.
A EMZ Door Catch Kit, including the latch and catch replaces any faulty catch whatever the serial number.
If the Latch only, is required the correct Latch can be identified from partfinder, by viewing the attached photograph.
n4408f00: CONDENSOR DRYER BASE/WHEELS
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CONDENSOR BASE ASSEMBLY/REMOVAL OF WHEELS FROM THE BASE
FROM SERIAL NUMBER 80424.00001 a new condensor dryer base assembly has been used in production.
The new assembly has sliders moulded into the base to replace the original 2 rear wheels.
n4409i01: Bearing Pad Grooved
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
'C' Energy Condenser Tumble Dryers.
From serial number 90817.0001 the quantity of bearing pads C00255284 fitted on production was reduced fro 5 to 4.
'B' Energy Condenser Tumble Dryers are not effected and will continue to use 5 bearing pads
n4410k01: TUMBLE DRYER HEATER CHANGE
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FROM SERIAL NUMBER 01112.0000 (12th November 2010) A NEW HEATER WITH A COLOMBO CONNECTOR HAS
BEEN USED IN PRODUCTION.
THIS NEW HEATER IS NOT INTERCHANGEABLE WITH THE PREVIOUS ONE.
CLICK "VIEW LIST" BELOW TO SELECT THE CORRECT PART REQUIRED.
mod.IS70C
page 19
Advertisement
