Serial Ata Connectors: Sata1~Sata4 - Acer Aspire E571 Service Manual

Serial ATA Connectors: SATA1~SATA4

SATA1~SATA4 are high-speed SATAII interfaces ports. Each supports data rates of 300MB/s and is fully compliant
with Serial ATA specifications. Each Serial ATA connector can connect to one hard disk device.
Fan Power Connectors: CPU_F2, SYS_F2
The fan power connectors support system cooling fan with +12V. When you connecting the wire to the connectors,
always take note that the red wire is the positive and should be connected to the +12V, the black wire is ground
and should be connected to GND. If the main board has a system hardware monitor chipset onboard, you must
use a specially designed fan with speed sensor to take advantage of the CPU fan control.
Important! Fan/heatsink with 3 or 4 pins are both available for CPU_F2. CPU_F2 supports fan control.
Chapter 5
SATA cable
SATA power cable
SATA connector
SATA device
67