Wake-Up Event Specification (Default Setting In Bios); Front Panel Led States; System Memory - Acer Aspire E571 Service Manual

Wake-up Event Specification (Default Setting in BIOS)

S1
Power button
Enable (default),
Disabled
PS2 keyboard Enabled,
Disabled (default)
USB Enabled (default),
Disabled
keyboard
PME Enabled (default),
Disabled
Modem (ring)
Enabled,
Disabled (default)
RTC
Enabled,
Disabled (default)

Front Panel LED States

State for a Single Color Power LED (Blue)
LED State Description
Steady Blue Running
Blinking Blue Sleeping
Off Power Off
State for LAN LED (Blue)
LED State Description
Blinking blue Active
Off Idle
State for a Single Color Storage LED (Blue)
LED State Description
Blinking blue Active
Off Idle

System Memory

Item Specification
Feature • Four DDR2 sockets
• 256MB/ 512MB/ 1GB/ 2GB DDR2 DIMMs support
• Dual channel function enabled when plugging in two same memory size
• DDRII memory 533/667/800MHz support
• I/O voltage of 1.8V for DDRII
• Improved flexible memory architecture
18
S3
Enabled (default),
Disabled
Enabled,
Disabled (default)
Enabled (default),
Disabled
Enabled (default),
Disabled
Enabled,
Disabled (default)
Enabled,
Disabled (default)
ACPI State
S0
S1, S3
S4, S5
Controller
State
Active
Idle
Controller
State
Active
Idle
DDR2 memory modules
S4 S5
Enabled (default), Enabled (default),
Disabled Disabled
N/A N/A
Enabled, N/A
Disabled (default)
Enabled (default), Enabled (default),
Disabled Disabled
Enabled, Enabled,
Disabled (default) Disabled (default)
Enabled, Enabled,
Disabled (default) Disabled (default)
Chapter 1