Kenwood KDWTTB10 Installation Instructions Manual page 29

• If the mains cable is damaged, it must be replaced by the manufacturer or its service agent in
order to avoid a hazard.
• Remove the door to the washing compartment when removing an old dishwasher from service
or discarding it.
• During installation, the mains cable must not be excessively or dangerously bent or flattened.
• Do not tamper with controls.
• The appliance is to be connected to the water mains using new hose sets.
• The maximum number of place settings to be washed is 6.
• The maximum permissible inlet water pressure is 1Mpa, and the minimum permissible inlet
water pressure is 0.04Mpa.
earthing instructions
WARNING: THIS APPLIANCE MUST BE EARTHED.
• This appliance is equipped with a mains cable having an equipment-earthing conductor
and an earthing plug.
• The plug must be plugged into an appropriate mains socket that is installed and earthed
in accordance with local standards and requirements.
KDWTTB10_IB_final110317.indd 29
29
21/03/2011 10:05 AM