Hinge Bracket Mounted; Door Pivot Pin Mounted; Door Slot Mounted - Poulan Pro PR500N21SH Operator's Manual

Hide thumbs

Table Of Contents

Table of Contents

"FABRIC TOP" GRASS CATCHERS

TO ASSEMBLE AND ATTACH GRASS

CATCH ER

• Put grass catcher frame into grass bag

with rigid part of bag on the bottom.

• Slip vinyl bindings over frame.

NOTE: If vinyl bindings are too stiff, hold

them in warm water for a few minutes. If

bag gets wet, let it dry before using.

• Lift the rear door on the mower housing.

• For HINGE BRACKET mounted catcher,

place the grass catch er frame onto the

formed tabs on the rear door hinge

bracket.

• For HANDLE BRACKET mounted

catcher, place frame side hooks into

slots in handle brackets.

• For DOOR PIVOT PIN mounted catcher,

place the grass catcher frame hooks

onto the door pivot pins.

• For DOOR SLOT mounted catcher,

place the grass catcher frame hooks

into the slots of the rear door.

NOTE: The grass catcher is secured to the

lawn mower housing when the rear door is

lowered onto the grass catcher frame.

Vinyl

bindings

CAUTION: Under normal usage, the

catcher material is subject to de te ri o ra-

tion and wear and should, therefore, be

checked frequently for replacement. Any

replacement catcher should be checked

to ensure compliance with original man u-

fac tur er's spec i fi ca tions.

CAUTION: Do not run lawn mower

with out the discharge deflector (rear

door), approved grass catcher, clipping

de flec tor or mulcher plate in place. Never

attempt to operate mower with the dis-

charge deflector (rear door) removed or

propped open.

ASSEMBLY