Setting Up The Printer - Brady BMP 41 Quick Start Manual

English

Setting Up the Printer

Power is supplied to the BMP
pack, or through an AC power adapter.
Do not disassemble or mistreat the battery pack.
The Battery Pack should only be used in the BMP
Do not use any other rechargeable battery pack other than the BMP-UBP in the
®
BMP 41 Label Printer.
Do not allow metal or other conductive materials to touch the battery terminals.
Store your battery pack only in a cool, dry place.
The battery pack must be recycled or disposed of properly according to federal, state,
and municipal regulations.
Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
Do not short-circuit a cell or a battery.
Do not use any charger other than that specifically provided for use with the equipment.
Do not use any cell or battery which is not designed for use with the equipment.
Do not mix cells of different manufacture, capacity, size or type within a device.
Secondary cells and batteries need to be charged before use. Always use the correct
charger and refer to the manufacturer's instructions or equipment manual for proper
charging instructions.
6/7/13
®
41 Label Printer through a BMP41-BP NiMH battery
®
Setting Up the Printer
41 Label Printer.
®
BMP 41 Quick Start Guide
3