Table of Contents
Advertisement
How to Read Stored Messages
1. Select Read messages from the
from the Messages memory. Select Card messages to read
messages stored in the SIM card memory.
2. Press YES.
3. Scroll with the right and left arrows until you find the message
you are looking for.
4. Press YES.
5. Read the message as described in How to Read a Message, p. 42.
How to Send Messages
1. Select Send messages from the
2. Press YES.
New appears in the display.
3. Press YES to enter a new message.
An empty display appears.
4. Enter your message.
You can backspace with the left arrow and erase characters to the
left of the cursor or insert characters in the cursor's position.
5. Press YES when you have completed your message.
6. Press YES if you wish the receiver to reply to the message. Press
NO if you do not.
7. Enter the receiver's phone number or recall it from the phone
book. To access the phone menu, press the left arrow.
8. Press YES to send the message now or NO to store the message
for later use.
44
menu to read messages
MAIL
menu.
MAIL
If you decide to send the message later, the message is labelled
Written instead of Sent when you access the message.
How to Repeat a Message
Sometimes you may want to repeat a message when the receiver
could not be reached. You can instruct you Service Centre to repeat
a message for a certain amount of time: 1 hour, 12 hours, 1 day, 1
week or maximum (depending on your operator).
1. Select Send messages from the
2. Scroll to Options and press YES.
3. Press YES to select the Valid per option.
4. Scroll to the desired repeat length and press YES.
How to Change a Message Type
The phone is prepared for sending other types of messages. Your
Service Centre of your network may offer the facility to convert a
text message into a format (fax, telex, voice, etc.) that suits the
receiver of the message.
Consult your Service Centre for further information about the
formats you can use.
1. Select Send messages from the
2. Scroll to Options and press YES.
3. Scroll to the Msg type option and press YES.
4. Select the required format and press YES.
Note! Standard stands for an ordinary text message (SMS).
menu.
MAIL
menu.
MAIL
EN/LZT 126 1353 R1B
Advertisement
Table of Contents
